Extra wide, heavy duty Fiberglass (FRT/GRP) Dhroni, PUF filled to resist impacts during handling and transportation /  shipping. Comes with Rosewood surface finish or plain colour. Size 121 cm x 92 cm x 12 cm
FRP DHRONI
Extra Wide Heavy Duty

Heavy duty FRP Dhroni of standard size excellently finished in wood designs or plain colour.

Size :  289 cm x 78 cm x 14
FRP DHRONI (Standard)

Attractively shaped FRP stands. Ballasted for stabilitly. Allows maximum leg room around the Dhroni, compared to usual Stands and Tables.

FRP DHRONI STAND

This Table's size can be reduced by removing the legs to achieve savings in freight volume. Can be refixed easily, using bolts.

Shown here wilth a FRP Stretched Droni.
FRP DHRONI ON COLLAPSIBLE TABLE

Excellently carved wooden Dhroni made from single piece medicinal wood. Has all around brass flat protection to prevent cracks. Here it is placed on a tiltable steel table which has an innovative design by which the head end can be lowered by rotating a handle wheel clockwise for shiro- dhara and the leg end can be lowered for Pizhichil/ Sarvanga Dhara by anticlockwise rotation.

Wooden Dhroni - Type lll

Made of hand carved medicinal wood and highly decorated with brass flowers on floral designs and brass protection on corners and legs. Adds beauty to the treatment room

All - AROUND WOODEN TABLE

Export quality wooden Dhroni made of seasoned country  Venga wood. Exquisitely hand crafted with shaped handles and carved designs on top and sides. Brass flat protection is provided on the periphery.

WOODEN DHRONI (EXPORT QUALITY)

2.5 Meter long Wooden Dhroni with a bottom shelf for Dhara collection vessel and for storage of oils towel, vessels etc. Made from Neem Wood

WOODEN DHRONI (With Bottom Shel

A Sturdy Dhara Stand made with heavy duty steel pipes and ballasted for perfect balance. Fully power coated to resist rusting. The FRP Dhara Vessel is a life long product that can be used for all types of Shirodharas.

Size: 200 x 65 cm
STEEL DHARA STAND

The oil heating system consists of a traditional hand made White Bronze vessel with an attached heating coil and an energy controller, to provide a steady flow of dhara at constant heat. Consumes very low electrical power.

OIL HEATING SYSTEM

Decorative, wooden Dhara Stand, hand carved out of medicinal wood, Comes with FRP Dhara Vessel or Copper Dhara Vessel.

Size 200 x 55 cm
WOODEN DHARA STAND (Standard Model)

Made from country Venga Wood. Beautifully hand carved. Collapsible design to reduce shipping costs. The White Bronze Dhara Vessel is hand casted.

DHARA STAND WOOD
(Export Quality ) with bronze Vessel

Similar to model lll in construction, but with a different chamber shape.

STEAM BATH LYING (Model lV)

This Wooden Steam Bath has a royal look with a standing Lion supporting the head. Top cabin is made in sections for easy removal by hand. Has a wooden cabinet under the bed to house the steam boiler and all treatment accessories medicines etc.

STEAM BATH LYING TYPE
Exotic Wood Design (Model V)

FRP Steam Chamber with adjustable seat and stool support stand. Provided with copper tube steam release system, FRP heat resistant cabin assures life ling performance, without need  for maintenance. The temperature and boiler operations can digitally controlled. Shown here with dual heating (electric and gas) , semi automatic bioler.

STEAM BATH
Sitting Type with Digital Control (Model -1)

This has a fixed bed made for Teakwood. Patient to the cabin from the lengthwise side by lifting up the FRP cabin. Comes with copper tube steam release system and Heavy Duty Boiler.

Size : 210 cm (L) X 78 cm (W) x 90 cm (H)
STEAM BATH SYSTEM
Lying Type (Model ll)

Fully automatic Electric boiler of 3 KW rating, made out of stainless stell. it has an integral alarm warning system which swiches off the boiler if the water  level inside goes down below a set positin, to safeguard against heater   damage. Can be connnected to water line to allow automaic make of water when  required. A perfume box is provided to inset herbs inside the boiler, to produce herbal steam bath. Fully insulated to avoid heat loss and save electric energy.

Size 70 cm (L) x 42 cm (w) x 50 cm(H)
FULLY AUTOMATIC STEAM GENERATOR (Electric)

This is a heavy duty KW boiler made of Stainless steel for manual operation using LPG Gas or electric power for heating. Supplier with Gas Bunner, Gas Fittings, Stand and special Steam Hose.

An automatic water level sensing system is provided to put off the boiler if water level is very low.

STEAM GENERATOR GAS AND ELECTRICALL
(Dual System)

 

This equipment is a portable, insulated, electrical steam generator, used for localized steaming of joints, back etc. A special steam hose with handle and water trap is provided. This is made of Stainless Steel, to assure long life.

NALI SWERDA YANTHRAM

This a Stainless Steel boiler for manual operation using LPG Gas for heating. Supplier with Gas Burner, Fittings, Stand and a special Steam Hose.

STEAM GENERATOR - GAS

 

This machine enables sarvanga dhara pradesika dhara, pizhichil etc. to be done with 2 masseurs only. Further the medicinal oils pouring ( from 5 pipes) on the body steadily at constant temperature give the added benefit of Dhara on body. This comes with re circulation system, filtering, oil heating and dhara dispensing systems as well as adjustable digital switches for fixing the travel - length for Ekanga Dhara. Design strictlyl based on "sahasra yoga" text.

Size 375 cm (L) x 205 cm (W) x 40 cm(H)
SARVANGA - DHARA / PIZHICHIL YANTHRAM (Machine)

This is a compact model and needs minimum space for operation. Provision of wheel allows this machine to be stored away easily. Artistic design on the wooden cladding confers an ethnic appearnace.

Size :  250 cm (L) x 45 cm (W) x 195 cm (H)
SARVANGA - DHARA / PIZHICHIL YANTHRAM (Machine)

 Wherever possible the traditional shapes have been used in these products.

Pills Making Equipment

This is used to make Ayurvedic Medicines in the classical pills shape. The paste received from the power ammi is fed into the extruder and the output is cut into pills shaps by 2 sets of form cutters. Finally a polishing unit gives the pills shape.

An indispensable equipment for treatment of infertility and ailments of the back. THis FRP SPINE bath is a sturdy one,. Available in plain, Rosewood or Teakwood finish with or without spine groove.

Size 101 cm x 63 cm x 20 cm
FRPSPINE BATH

adjustable leather cap made out of calf leather. Vinyl lining on the inner surface protects the leather form getting dirty and allows easy cleaning.

SIRO VASTI CAP
 

This is very useful one in treatment of ailments of Rheumatic nature, Neuralgia and skin diseases etc. Made self supporting with  a steel frame, this can be placed anywhere in a hospital. Light weight yet very sturdy.

Size : 170 cm x 76 cm x  40 cm
FRP AWAGAHA TUB

WOODEN VESSEL

this is designed for   executing Vamanam procedure comfortably. The Chair is designed to be stable in the inclined sitting position. Made out of Stainless or Power coated steel

This is an indispensable tool for Agnikarma. This is made from  5 metal viz. Gold, Silver, Copper, Iron and Tin

SHALAKA (Panchaloha)

VASTI YANTHRAM (White Bronze)

This has a stainless steel body with a brass head. The disposable vsti tips can be screwed to the head.

Mathra vasti yanthram

Made from surgical plastic. Transparent and stenrilizable the rounded tip   for painless insertion. Two types with different Nethrams are available.

VASTI YANTHRAM (Disposable)

This has disposable tips and vasti bags. The tips (Nethrams) and bag are disposable. The barrel end is threaded to take up vasti bag (plastic) without leakage, using a plastic nut.